Advances in Mechanical Engineering · 2019 · 18 citations · 17 references
EngineeringComputational EngineeringEnvironmental EngineeringComputational Fluid DynamicsFluid DynamicsHeat TransferAirflow SimulationIndoor Thermal EnvironmentThermal SimulationVentilation ModelingVentilation System DesignVentilation SystemsAirflow Distribution DesignComputational SimulationFlow PatternIndoor Air QualityJetsTurbulent JetsVentilation Simulation ModelsVentilation System Simulation
In this article, the air quality is maintained in the breathing zone of a human using personalized air curtain. The breathing zone is modeled and simulated with ANSYS-Fluent 18.1 software and predicted the thermo-fluids flow characteristics in the breathing zone. The clean air is supplied from the air curtain device to distribute in the breathing zone of a human. There are 11 nozzles created in the front portion of the air curtain device to supply clean air in front of the face of the human. The air curtain provides a sealed cover between the pollutant and face, which protects the inward flow of pollutants. The flow becomes turbulent even at low Reynolds numbers 136–686 due to the mixing of air jets from multi-nozzles in the air curtain device and entrainment of ambient air into the breathing zone. The thermal balance (comfort) between breathing zone and atmosphere was maintained using isothermal air jets. The standard k-ε model is used for predicting the turbulent characteristics of air flow. The results obtained from the simulation was analyzed for optimum airflow velocity to occupy the breathing zone with clean air completely. The best flow pattern is achieved for the optimum nozzle exit velocity of 3 m/s, height y = 70 mm from the bottom of breathing zone for nozzle width of 2 mm. These conditions ensured the air quality and the comfort velocity (0.5 to 0.8 m/s) and pressure about 1 bar in the breathing zone.
17
Investigation of two plane paralleltiinven ilated jets
Yu-Hsuan Lin, Ming-Jen Sheu · Experiments in Fluids · 1990 · 100 citations