Effects of cooling rate and strain rate on phase transformation, microstructure and mechanical behaviour of thermomechanically processed pearlitic steel

Abstract

In the present investigation, thermomechanical controlled processing of a high carbon steel and a Nb microalloyed high carbon steel have been conducted in a Gleeble 3800 simulator. Different microscopic techniques have been utilised for the characterisation of the microstructure and hardness data has been used for the evaluation of mechanical properties. In order to suppress the transformation enthalpy, experiments are performed under varying cooling rate and strain rate. The effect of niobium microalloying leads to the lowering of recalescence and suppresses austenite to pearlite transformation start and finish temperatures at every cooling rate which leads to the refinement of interlamellar spacing and thereby improve hardness and predicted yield strength values. It is evident that a higher strain rate accelerates the kinetics of pearlite transformation and elevates the pearlite start temperature. The increase of strain rate in the range of 1 s–1 to 100 s–1 followed by a constant cooling rate (free cooling) leads to the refinement of interlamellar spacing as well as improves mechanical properties. The true stress-true strain diagram at a lower strain rate indicates higher strain hardening with sharp yield point, whereas the same at a higher strain rate indicates the sudden occurrence of strain softening. The variation in recalescence due to the alternation of the cooling rate and strain rate has been correlated with the final microstructure and mechanical properties.