IEEE Transactions on Applied Superconductivity · 2019 · 15 citations · 20 references
Natural SciencesElectrical EngineeringMaterials ScienceElectromagnetismMagnetic MaterialsMechanical Behavior Of MaterialsStrain EngineeringSuperconducting Magnet SystemsSuperconducting Thin FilmsThin Film StrainHigh-temperature Superconducting Magnet TechnologyHigh-temperature Superconducting MagnetsMagnetic Coil DesignSuperconducting MagnetsSuperconducting TapesSuperconducting WiresTaper Optimization
Symmetric Tape Round (STAR) wires are only 1.6-1.9 mm in diameter and are made by winding 2.5-mm-wide REBCO tapes on an AWG 18 (1.02-mm diameter) copper wire former. Such ultra-small diameter wires are possible by the use of symmetric tapes where the REBCO film is positioned at the geometric center, close to the neutral axis. Such symmetric tape architecture is achieved by a strategic selection of the thickness of the copper stabilizer to match the thickness of the Hastelloy substrate. The substrate itself is made thin, to enable good tolerance to bend strain. The optimized STAR wire architecture is found to be mechanically robust and retain nearly 98% of its critical current of over 500 A at 77 K, self-field even when bent to a small radius of 15 mm. The superior bend strain tolerance of STAR REBCO wires make them suitable for use in canted cosine theta coils for future compact accelerator magnet applications.
20
Jeremy Weiss, Tim Mulder, Herman H.J. ten Kate et al. · Superconductor Science and Technology · 2016 · 223 citations · Full text
Natural Sciences, Electrical Engineering, Materials Science +15
U.P. Trociewitz, Matthieu Dalban-Canassy, Muriel Hannion et al. · Applied Physics Letters · 2011 · 160 citations · Full text
Natural Sciences, Electrical Engineering, Materials Science +16