Novel Monopole Microstrip Antennas for GPS, WiMAX and WLAN Applications

Abstract

In this paper, two novel low-profile monopole antennas are presented for simultaneous operation in GPS (Global Positioning System), WLAN (Wireless Local Area Network) and WiMAX (Worldwide Interoperability for Microwave Access) applications. The antennas constitute of a T-shaped microstrip feed line and directly coupled strips to generate multiple bands. The proposed antennas are printed on one side of a low-cost FR4 epoxy substrate and partial ground plane (metal plane is etched partially) are fabricated on the other side of the substrate. The overall dimension of antenna is [Formula: see text][Formula: see text]mm 3 . Measured results show that the antenna1 (quad band) covers the four distinct operating bands of 320[Formula: see text]MHz (2.17–2.49[Formula: see text]GHz), 190[Formula: see text]MHz (3.31–3.50[Formula: see text]GHz), 270[Formula: see text]MHz (5.18–5.45[Formula: see text]GHz) and 700[Formula: see text]MHz (5.5–6.20[Formula: see text]GHz). Antenna2 (penta band) covers the frequency bands of 1.29–1.98[Formula: see text]GHz (center frequency 1.61[Formula: see text]GHz), 2.78–2.91[Formula: see text]GHz (center frequency 2.83[Formula: see text]GHz), 3.59–3.94[Formula: see text]GHz (center frequency 3.75[Formula: see text]GHz), 5.15–5.33[Formula: see text]GHz (center frequency 5.24[Formula: see text]GHz) and 5.39–6.06[Formula: see text]GHz (center frequency 5.56[Formula: see text]GHz). The detail antenna design and parametric analyses are discussed in steps. The characteristic of radiation pattern and gain are measured. The measured and simulated results are in good agreement. The antennas are designed using a simulation software HFSS v.15.