Virtual and Physical Prototyping · 2019 · 113 citations · 29 references
EngineeringManufacturing EngineeringMaterials EngineeringAdditive ManufacturingManufacturing ProcessesMechanical Behavior Of Materials3D PrintingDesign For Additive ManufacturingFabrication MaterialsMaterial ExtrusionMetal Additive ManufacturingAdhesion MechanismsAdhesion StrengthDeposition ModelingDiffusion MechanismsExploratory Case StudyMulti-material 3D PrintingMulti-material ExtrusionMulti-material Printing
The potentiality of the Fused Deposition Modeling (FDM) process for multi-material printing has not yet been thoroughly explored in the literature. That is a limitation considering the wide diffusion of dual extruders printers and the possibility of increasing the number of these extruders. An exploratory study, based on tensile tests and performed on double-material butt-joined bars, was thus conceived; the aim was to explore how the adhesion strength between 3 pairs of filaments (TPU-PLA, PLA-CPE, CPE-TPU) is influenced by the material printing order, the type of slicing pattern used for the layers at the interface, and the infill density of the layers below the interface. Results confirm the effectiveness of mechanical interlocking strategies in increasing the adhesion strength even when thermodynamic and diffusion mechanisms of adhesion are not robust enough. Besides, thermal aspects also demonstrated to play a relevant role in influencing the performance of the interface.
29
J.M. Chacón, M.A. Caminero, Eustaquio García Plaza · Materials & Design · 2017 · 1.5K citations
Engineering, Manufacturing Engineering, Materials Engineering +14
4D Printing: Multi‐Material Shape Change
Skylar Tibbits · Architectural Design · 2014 · 1.1K citations
Materials for additive manufacturing
David L. Bourell, Jean Pierre Kruth, Ming C. Leu et al. · CIRP Annals · 2017 · 1K citations