Scalable Polymer Nanocomposites with Record High‐Temperature Capacitive Performance Enabled by Rationally Designed Nanostructured Inorganic Fillers

He Li, Ding Ai, Lulu Ren, Bin Yao, Zhubing Han, Zhonghui Shen, Jianjun Wang, Long‐Qing Chen, Qing Wang

Advanced Materials · 2019 · 455 citations · 39 references

DOIFull text

Open access

Concepts

TL;DR

High‑energy‑density dielectric polymers that operate efficiently at elevated temperatures are needed for next‑generation microelectronics and power systems, yet existing materials are limited to relatively low working temperatures. The study reports solution‑processable polymer nanocomposites incorporating Al₂O₃ fillers of varied morphologies (nanoparticles, nanowires, and nanoplates). The authors investigate field‑dependent electrical conduction of these nanocomposites at elevated temperatures. The composites’ conduction and breakdown strength depend strongly on filler morphology, and nanoplates achieve record capacitive performance (3.31 J cm⁻³ energy density, >90 % efficiency at 450 MV m⁻¹ and 150 °C), surpassing current state‑of‑the‑art materials.

Abstract

Next-generation microelectronics and electrical power systems call for high-energy-density dielectric polymeric materials that can operate efficiently under elevated temperatures. However, the currently available polymer dielectrics are limited to relatively low working temperatures. Here, the solution-processable polymer nanocomposites consisting of readily prepared Al2 O3 fillers with systematically varied morphologies including nanoparticles, nanowires, and nanoplates are reported. The field-dependent electrical conduction of the polymer nanocomposites at elevated temperatures is investigated. A strong dependence of the conduction behavior and breakdown strength of the polymer composites on the filler morphology is revealed experimentally and is further rationalized via computations. The polymer composites containing Al2 O3 nanoplates display a record capacitive performance, e.g., a discharged energy density of 3.31 J cm-3 and a charge-discharge efficiency of >90% measured at 450 MV m-1 and 150 °C, significantly outperforming the state-of-the-art dielectric polymers and nanocomposites that are typically prepared via tedious, low-yield approaches.

References

39