Rare Metals · 2019 · 18 citations · 38 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsMetallurgyAlloysFriction Stir WeldingMetalsWelding ProcessesAluminium AlloysAluminum AlloysCryogenic EngineeringCryogenic TreatmentFriction Stir Weld Residual StressThermomechanical EffectsWeldability Of AlloysWelding Metallurgy
Abstract In order to improve the comprehensive mechanical properties, deep cryogenic treatment (DCT) prior to aging was carried out on friction‐stir‐welded (FSW) 2198 Al–Li alloy; afterward, the microstructure and tensile properties were characterized by means of optical microscopy (OM), transmission electron microscopy (TEM) and tensile testing. The results show that FSW 2198 alloy through DCT prior to aging (DAT) possesses superior tensile properties than conventional aging treatment (AT). The microstructural analysis reveals that DAT alloy exhibits a finer grain structure, since DCT might effectively alleviate the residual stress in FSW 2198 alloy and thus decrease the driving force for grain coarsening in subsequent aging process. Moreover, DCT generates dislocation multiplication, which provides more preferential nucleation sites for T1 (Al 2 CuLi) phase during subsequent aging treatment, resulting in high‐density fine T1 phases and thin precipitate‐free zone within DAT alloy. Such reasonable microstructure leads to DAT alloy possessing better strength‐ductility combination compared to AT alloy.
38
The influence of Cu/Li ratio on precipitation in Al–Cu–Li–x alloys
B. Decreus, A. Deschamps, Frédéric De Geuser et al. · Acta Materialia · 2013 · 416 citations
Natural Sciences, Materials Engineering, Materials Science +12
Microstructural evolution during ageing of Al–Cu–Li–x alloys
Vicente Araullo‐Peters, Baptiste Gault, Frédéric De Geuser et al. · Acta Materialia · 2014 · 262 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +12