Direct Non‐Oxidative Methane Conversion in a Millisecond Catalytic Wall Reactor

Abstract

Direct non-oxidative methane conversion (DNMC) has been recognized as a single-step technology that directly converts methane into olefins and higher hydrocarbons. High reaction temperature and low catalyst durability, resulting from the endothermic reaction and coke deposition, are two main challenges. We show that a millisecond catalytic wall reactor enables stable methane conversion, C₂₊ selectivity, coke yield, and long-term durability. These effects originate from initiation of the DNMC on a reactor wall and maintenance of the reaction by gas-phase chemistry within the reactor compartment. The results obtained under various temperatures and gas flow rates form a basis for optimizing the process towards lighter C₂ or heavier aromatic products. A process simulation was done by Aspen Plus to understand the practical implications of this reactor in DNMC. High carbon and thermal efficiencies and low cost of the reactor materials are realized, indicating the technoeconomic viability of this DNMC technology.