Environmental Science & Technology · 2019 · 63 citations · 28 references
Natural SciencesMaterials EngineeringMaterials ScienceAdditive ManufacturingMaterials ChemistryNanomaterials3D PrintingCarbon NanotubesNanocompositesNanotubesPolymer Additive ManufacturingVolatile Organic CompoundsCarbon Nanotube Composite MaterialsCarbon Nanotube CompositesCarbon Nanotube NanocompositesComposite Thermal DegradationFilament MaterialsInhalation Exposure ModelingNanotube-based CompositesVolatile Organic Compounds Emissions
A commercially available, 3D printer nanocomposite filament of carbon nanotubes (CNTs) and acrylonitrile–butadiene–styrene (ABS) was analyzed with respect to its VOC emissions during simulated fused deposition modeling (FDM) and compared with a regular ABS filament. VOC emissions were quantified and characterized under a variety of conditions to simulate the thermal degradation that takes place during FDM. Increasing the residence time and temperature resulted in significant increases in VOC emissions, and the oxygen content of the reaction gas influenced the VOC profile. In agreement with other studies, the primary emitted VOC was styrene. Multiple compounds are reported in this work for the first time as having formed during FDM, including 4-vinylcyclohexene and 2-phenyl-2-propanol. Our results show that printing 222.0 g of filament is enough to surpass the reference concentration for inhalation exposure of 1 mg/m3 according to the EPA’s Integrated Risk Information System (IRIS). The presence of CNTs in the filament influenced VOC yields and product ratios through three types of surface interactions: (1) adsorption of O2 on CNTs lowers the available O2 for oxidation of primary backbone cleavage intermediates, (2) adsorption of styrene and other VOCs to CNTs leads to surface-catalyzed degradation, and (3) CNTs act as a trap for certain VOCs and prevent them from entering vapor emissions. While the presence of CNTs in the filament lowered the total VOC emission under most experimental conditions, they increased the emission of the most hazardous VOCs, such as α-methylstyrene and benzaldehyde. The present study has identified an increased risk associated with the use of CNT nanocomposites in 3D printing.
28
Ultrafine particle emissions from desktop 3D printers
Brent Stephens, Parham Azimi, Zeineb El Orch et al. · Atmospheric Environment · 2013 · 476 citations · Full text
Engineering, Environmental Engineering, Materials Engineering +17
Parham Azimi, Dan Zhao, Claire Pouzet et al. · Environmental Science & Technology · 2016 · 371 citations · Full text
Engineering, Environmental Engineering, Manufacturing Engineering +17
Shujuan Zhang, Ting Shao, H. Selcen Kose et al. · Environmental Science & Technology · 2010 · 270 citations
Engineering, Chemical Engineering, Environmental Engineering +17