Identification of the Solid Electrolyte Interface on the Si/C Composite Anode with FEC as the Additive

Abstract

Silicon-based anodes have the potential to be used in next-generation lithium ion batteries owing to their higher lithium storage capacity. However, the large volume change during the charge/discharge process and the repeated formation of a new solid electrolyte interface (SEI) on the re-exposed Si surface should be overcome to achieve a better electrochemical performance. Fluoroethylene carbonate (FEC) has been widely used as an electrolyte additive for Si-based anodes, but the intrinsical mechanism in performance improvement is not clear yet. Here, we combined solid-state NMR, X-ray photoelectron spectroscopy, and X-ray photoemission electron microscopy to characterize the composition, structure, and inhomogeneity of the SEI on Si/C composite anodes with or without the FEC additive. Similar species are observed with two electrolytes, but a denser SEI formed with FEC, which could prevent the small molecules (i.e., LiPF₆, P-O, and Li-O species) from penetrating to the surface of the Si/C anode. The hydrolysis of LiPF₆ leading to Li _xPO _yF _z and further to Li₃PO₄ could also be partially suppressed by the denser SEI formed with FEC. In addition, a large amount of LiF could protect the cracking and pulverization of Si particles. This study demonstrates a deeper understanding of the SEI formed with FEC, which could be a guide for optimizing the Si-based anodes for lithium ion batteries.