20:T518,Recently, a new class of 2D materials, i.e., transition metal carbides, nitrides, and carbonitrides known as MXenes, is unveiled with more than 20 types reported one after another. Since they are flexible and conductive, MXenes are expected to compete with graphene and other 2D materials in many applications. Here, a general route is reported to simple self-assembly of transition metal oxide (TMO) nanostructures, including TiO₂ nanorods and SnO₂ nanowires, on MXene (Ti₃ C₂ ) nanosheets through van der Waals interactions. The MXene nanosheets, acting as the underlying substrate, not only enable reversible electron and ion transport at the interface but also prevent the TMO nanostructures from aggregation during lithiation/delithiation. The TMO nanostructures, in turn, serve as the spacer to prevent the MXene nanosheets from restacking, thus preserving the active areas from being lost. More importantly, they can contribute extraordinary electrochemical properties, offering short lithium diffusion pathways and additional active sites. The resulting TiO₂ /MXene and SnO₂ /MXene heterostructures exhibit superior high-rate performance, making them promising high-power and high-energy anode materials for lithium-ion batteries.21:T472,A 125 μm thickness, rollable, paper-based triboelectric nanogenerator (TENG) has been developed for harvesting sound wave energy, which is capable of delivering a maximum power density of 121 mW/m(2) and 968 W/m(3) under a sound pressure of 117 dBSPL. The TENG is designed in the contact-separation mode using membranes that have rationally designed holes at one side. The TENG can be implemented onto a commercial cell phone for acoustic energy harvesting from human talking; the electricity generated can be used to charge a capacitor at a rate of 0.144 V/s. Additionally, owing to the superior advantages of a broad working bandwidth, thin structure, and flexibility, a self-powered microphone for sound recording with rolled structure is demonstrated for all-sound recording without an angular dependence. The concept and design presented in this work can be extensively applied to a variety of other circumstances for either energy-harvesting or sensing purposes, for example, wearable and flexible electronics, military surveillance, jet engine noise reduction, low-cost implantable human ear, and wireless technology applications.22:T5a3,

	Year	Citations

References