Biotechnology Reports · 2019 · 83 citations · 12 references
EngineeringBioengineeringBiotechnologyBioprocess EngineeringWastewater TreatmentWater TreatmentAdsorptive SeparationsHeavy Metal RemediationAdsorption IsothermsAdsorption Of Heavy MetalsBiomass CharacterizationBiosorptionEnergy Dispersive X-ray SpectroscopyEnergy-dispersive X-ray FluorescenceEnergy-dispersive X-ray SpectroscopyLangmuir Adsorption Model
• Saccharomyces cerevisiae showed 76% Cu(II) removal efficiency. • The biosorption process was adjusted to the Langmuir isotherm. • The yeast presented maximum biosorption capacity of 4.73 mg g −1 . • The analyzed variables influence the biosorption process. With the industrial and population advances, the generation of effluents containing heavy metals has grown a lot. In this work, the commercial biomass of the yeast Saccharomyces cerevisiae Perlage ® BB were carried out as Cu (II) ion biosorbent. The influence of some variables such as metal concentration, pH range, equilibrium time and biomass concentration were evaluated. The biosorption capacity was measured by adsorption isotherms, with the Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) models. The characterization of the biomass surface were investigated by Dispersive Energy X-Ray Fluorescence Spectrometry (EDX) and Atomic Force Microscopy (AFM). The results showed that the biomass presented good biosorption efficiency. The best fit of the data was obtained with the Langmuir model, detecting the maximum biosorption capacity of 4.73 mg g −1 . By the methods used in the characterization of the biomass surface, it was possible to verify the presence of the Cu (II) ion in the yeast.
12
Rehab M. Ali, Hesham Hamad, Gihan F. Malash · Ecological Engineering · 2016 · 697 citations
Engineering, Chemical Engineering, Environmental Engineering +17
Qingqing Peng, Yunguo Liu, Guangming Zeng et al. · Journal of Hazardous Materials · 2009 · 234 citations