IEEE Transactions on Power Electronics · 2019 · 66 citations · 31 references
EngineeringElectrical EngineeringEnergy SystemsPower ElectronicsRenewable Energy SystemsConverter TopologiesDc-dc ConversionDc-dc ConvertersRenewable Energy Power ConversionSolar Energy SystemsSolar Photovoltaic SystemsCurrent Ripple ReductionDc-dc Converter TopologiesElectrolytic CapacitorsPhotovoltaic SystemsPower Electronic Converter InterfacePower MosfetsZero-current SwitchingZero-voltage Switching
In high-voltage bus-based photovoltaic systems, a power electronic interface is required to manage the power flow in between the photovoltaic (PV) panel, battery, and the high-voltage dc bus. In this paper, a novel three-port dc/dc topology is proposed for this application. Pulsewidth and phase-shift offer two degrees of freedom to effectively regulate the power flows. On the primary side, the input current ripple is reduced due to the interleaved structure. This avoids the usage of the bulky electrolytic capacitors on the PV terminal. On the secondary side, a voltage sixfolder rectifier is employed to boost the step-up ratio. This reduces the transformer's secondary-side turns number. Moreover, the voltage stresses of secondary-side mosfets and diodes are reduced to one-third of the output voltage. Zero-voltage switching and zero-current switching are realized among all power mosfets and diodes, respectively, and in an extended range. A 500-W converter prototype, linking a battery pack, a PV panel, and a 760 V dc bus, is designed and tested to verify the proof-of-concept. Both the circuit functionality and theoretical analysis are validated by the experimental results.
31