Fabrication of thin film Ag/AgCl reference electrode by electron beam evaporation method for potential measurements

Tung Son Vinh Nguyen, Tin Chanh Duc Doan, Chien Mau Dang

Advances in Natural Sciences Nanoscience and Nanotechnology · 2019 · 12 citations · 19 references

Concepts

Abstract

Abstract In this study the novel approach for fabricating thin film Ag/AgCl electrodes was proposed using electron beam evaporation method for potential measurements as reference electrodes. A silver and silver/silver chloride (Ag/AgCl) thin films with a thickness of 300 nm were evaporated on the silicon substrate which had been initially oxidized to create the insulating silicon dioxide (SiO 2 ) layer. The dimension of the electrodes was about 0.5 mm × 2.0 mm. The characterization of AgCl layers was performed with field emission scanning electron microscopy, x-ray diffraction and energy dispersive x-ray spectroscopy, Raman spectroscopy and optical microscopy. The open circuit potential (OCP) measurements in buffer solution pH 7 were investigated between the fabricated Ag/AgCl electrodes and a commercial Ag/AgCl electrode as the reference electrode. The measured OCP values had insignificant disparity. The good reproducibility and potential stability with the average potential value and deviation were within 334.0 mV ± 4.07 mV. In addition, a pH sensing test was also performed by using a laboratory-made potentiometer, which showed a sensitivity of 48.01 mV pH −1 , with the correlation coefficient being greater than 0.99. The results showed that the fabricated thin film Ag/AgCl electrodes which could be obtained by a simple and fast process had high purity and could be used as reference electrodes for potential measurements.

References

19