International Journal of Electrochemical Science · 2019 · 30 citations · 31 references
Natural SciencesMaterials EngineeringMaterials ScienceCatalysisElectrochemical EngineeringEnergy MaterialsAnode MaterialsCatalytic MaterialsElectrochemical CellsElectrode MaterialsFuel Cell MaterialsFuel CellsCatalytic ActivityFuel Cell CatalystsFuel Cell ElectrodesMetal Oxide CatalystsMethane OxidationSolid Oxide Fuel Cell MaterialsSolid Oxide Fuel Cells
Natural gas has been exploited as an available energy source for solid oxide fuel cells in recent years. However, the problem of carbon deposition that forms on nickel-based anodes by using direct methane results in performance failure of cells. It is well known that the catalytic partial oxidation of methane is a good solution to suppress carbon formation. Herein, we present an investigation of the catalytic activity of Ni/YSZ cermet anodes as a function of the CH 4 /O 2 flow rate ratio (1 ≤ R in ≤ 5). The behavior of methane catalytic activity was characterized using mass spectrometry (MS) and temperatureprogrammed oxidation (TPO). The catalytic activity of methane oxidation at 700 °C showed that Ni oxidation occurred at R in ≤ 1.67. A basic equilibrium to prevent carbon deposition and Ni oxidation occurred at R in = 2.5, which exhibited the best activity among the Ni/YSZ electrodes. Through the electrochemical measurements and impedance spectroscopy analysis of the cell, it was proved that the cell possessed the lowest ohmic resistance and optimized output performance at R in = 2.5. In addition, a stable cell operation at 0.9 V was guaranteed without serious degradation.
31
Effects of dilution on methane entering an SOFC anode
K. Kendall, Caine Finnerty, Gary J. Saunders et al. · Journal of Power Sources · 2002 · 103 citations
Engineering, Chemical Engineering, Mechanical Engineering +10