ACS Applied Energy Materials · 2018 · 13 citations · 35 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemical EngineeringElectrochemistryEnergy MaterialsBattery MaterialsElectrochemical CellsElectrochemical Energy StorageElectrode MaterialsEnergy StorageEnergy Storage MaterialsCompressibilityCompressionCurrent CollectorsEnergy DensityGraphene OxideLithium-ion BatteriesNanocomposite ElectrodesReduced Graphene Oxide
We report the fabrication and electrochemical performance of metal-foil free Li4Ti5O12 (LTO) and LiNi1/3Co1/3Mn1/3O2 (NCM) electrodes supported on conductive and porous reduced graphene oxide/poly(acrylic acid) (rGO-PAA) aerogels. The highly porous rGO-PAA (∼6 mg cm–3) enables slurry infiltration of LTO and NCM to form composite electrodes with tunable mass loadings (∼3–30 mg cm–2), and the resultant composites can withstand 100-fold compression (from 3.2 mm to ∼30–130 μm) to achieve electrode densities of 2–3 g cm–3. The adequate compressibility of the rGO-PAA coupled with removal of the conventional metal-foil weight and volume provides high volumetric energy densities of 1723 Wh L–1 for NCM and 625 Wh L–1 for LTO at low power density, representing a 25% increase in energy density over similar electrodes built with metal-foil current collectors. These metrics demonstrate the utility of the rGO-PAA current collector to reduce the weight and volume of lithium-ion electrodes without sacrificing energy density.
35
Hiroyuki Nishide, Kenichi Oyaizu · Science · 2008 · 1.1K citations
Nanostructured high-energy cathode materials for advanced lithium batteries
Yang‐Kook Sun, Zonghai Chen, Hyung‐Joo Noh et al. · Nature Materials · 2012 · 1.1K citations
Natural Sciences, Materials Engineering, Materials Science +14