IEEE Transactions on Power Electronics · 2018 · 41 citations · 10 references
EngineeringElectrical EngineeringCircuit TheoryPower ElectronicsSemiconductor DevicesConverter TopologiesGate Drive CircuitsPower ManagementSnubber CircuitsSwitching TechniquesControlled DelayDc-dc Converter TopologiesHard SwitchingHigh-voltage InsulationInsulated Gate Bipolar Transistor Gate DriversInsulated-gate Field-effect TransistorsSwitching StrategiesVoltage Unbalance
This paper presents a balancing algorithm for the so-called Director Switch, a controlled, reverse conducting, self-powered, high-voltage switch, using series-connected insulated gate bipolar transistors (IGBTs). This is a key component on two new voltage-source, high-voltage direct current (HVDC) converter topologies. These, which promise efficiency, cost, and size reductions, are an alternate arm converter and a series bridge converter. One of the main design challenges of the director switch is how to supply the IGBT gate drivers, and other auxiliary electronics while overcoming the high-voltage insulation barrier to ground level. In this paper, this is achieved by using the energy stored in a capacitive clamp snubber circuit, which also helps with the overvoltage mitigation during rare hard-switching events. However, the clamp capacitor and by proxy the IGBT voltages become highly unbalanced during operation, compromising the integrity of the switch. This paper presents a balancing strategy that consists in applying a controlled delay in the switching of the IGBT levels, in a way that forces a voltage balance on all the switch levels. The paper explains the unbalance. Then, the balancing strategy is explained and validated on simulation and on a high-voltage experimental rig, on switches comprising two and three series-connected IGBTs, respectively.
10
Michael Merlin, D. Soto, Paul D. Judge et al. · IEEE Transactions on Power Electronics · 2017 · 140 citations · Full text