Sensors · 2018 · 24 citations · 20 references
Natural SciencesMaterials ScienceNuclear EngineeringMaterials CharacterizationMechanical Behavior Of MaterialsNuclear MaterialsResidual StressThermal StressesBragg Grating SensorsCuringFiber Bragg Grating SensorsFiber Bragg GratingsSeal OptimizationSealingStressTemperature Monitoring
An important factor for maintaining hermeticity of a metal-to-glass sealed electrical penetration assembly (EPA) is the residual stress in the sealing glass, which is generated during the EPA sealing process. A novel method to investigate and optimize the sealing process of EPAs, based on a fiber Bragg grating (FBG) sensor, is proposed in this research. An FBG was well bonded with sealing glass to measure the parameters of the glass during the sealing process. The temperature change during the heating process was able to be measured by Bragg wavelength shift. After the sealing glass solidified and dropped to room temperature, the residual stress was determined and the effect of temperature was minimized because the temperature before and after the sealing process was the same as room temperature. The curing temperature of the sealing glass was evaluated to specifically investigate the solidification process of the EPA. This study provides a basis for online stress and temperature monitoring of EPAs under external loads in nuclear power plants.
20
Ian W. Donald, Phillip M. Mallinson, Brian L. Metcalfe et al. · Journal of Materials Science · 2011 · 192 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +14
Simultaneous strain and temperature measurement with long-period gratings
Vikram Bhatia, David Campbell, Richard O. Claus et al. · Optics Letters · 1997 · 187 citations