Mn Modified Ni/Bentonite for CO2 Methanation

Abstract

To enhance the low-temperature catalytic activity and stability of Ni/bentonite catalyst, Ni-Mn/bentonite catalyst was prepared by introducing Mn into Ni/bentonite catalyst and was used for CO2 methanation. The results indicated that the addition of Mn enhanced the interaction between the NiO and the bentonite carrier, increased the dispersion of the active component Ni and decreased the grain size of the active component Ni, increased the specific surface area and pore volume of the Ni/bentonite catalyst, and decreased the average pore size, which suppressed the aggregation of Ni particles grown during the CO2 methanation process. At the same time, the Mn addition increased the amount of oxygen vacancies on the Ni/bentonite catalyst surface, which promoted the activation of CO2 in the methanation reaction, increasing the low-temperature activity and stability of the Ni/bentonite catalyst. Under the reaction condition of atmospheric pressure, 270 °C, V(H2):V(CO2) = 4, and feed gas space velocity of 3600 mL·gcat−1·h−1, the CO2 conversion on the Ni-Mn/bentonite catalyst with 2wt% Mn was 85.2%, and the selectivity of CH4 was 99.8%. On the other hand, when Mn was not added, the CO2 conversion reached 84.7% and the reaction temperature only raised to 300 °C. During a 150-h stability test, the CO2 conversion of Ni-2wt%Mn/bentonite catalyst decreased by 2.2%, while the CO2 conversion of the Ni/bentonite catalyst decreased by 6.4%.