Busbar Design for Distributed DC-Link Capacitor Banks for Traction Applications

Rana Alizadeh, Marcelo Schupbach, Tyler Adamson, Juan Carlos Balda, Yue Zhao, Shanshan Long, Kwan-Song Jung, Chirag R. Kharangate, Mehdi Asheghi, Kenneth E. Goodson

2018 · 20 citations · 12 references

Concepts

Abstract

High power density is an important requirement for traction motor drives as transportation systems continue their electrification trends. Increasing power density requires a system-level approach addressing all inverter components; particularly, power modules, thermal management system, and dc-link capacitor bank. This paper focuses on designing a distributed dc-link capacitor bank using multi-layer series-connected ceramic capacitors (MLSCs) which have higher operating temperature, lower ESL and lower volume than film capacitors. The paper addresses the design of a busbar assembly connecting several MLSCs to the inverter power modules and the power source. The main design goals are distributing the capacitors across the power modules to provide a short path to high-frequency current components, minimizing parasitic inductances, and achieving similar current profiles among all MLSCs. ANSYS™ Q3D simulations are used to evaluate the busbar current density. The impedance as function of frequency is measured on the prototyped busbar assembly. Experimental tests verify the proposed design ideas.

References

12