Rare Metals · 2018 · 23 citations · 30 references
Natural SciencesMaterials EngineeringMaterials ScienceComputational Materials ScienceFunctional MaterialsMaterials PhysicsAmorphous MaterialsAmorphous SolidsComposite MaterialsComputational Solid MechanicsMechanical Property SimulationMolecular DynamicsAmorphous AlloysAmorphous Form StabilityAmorphous MetalsAmorphous StructureExperimental Study DesignMolecular Simulation AlgorithmsMolecular Simulation Analysis
Abstract A new Fe‐based amorphous–crystalline composite without non‐metallic elements, Fe 55 Cr 15 Mo 15 Ni 10 W 5 , was prepared by melt‐spinning. The formation ability and structure information were investigated by X‐ray diffractometer (XRD), energy‐dispersive spectrometer (EDS) and scanning electron microscope (SEM). The mechanical properties of the amorphous–crystalline composite were investigated by nanoindentation. A molecular dynamics simulation study was performed to simulate the formation of Fe 55 Cr 15 Mo 15 Ni 10 W 5 amorphous alloy. The mechanical properties were obtained by compression simulations simultaneously. The results indicate that the Fe 55 Cr 15 Mo 15 Ni 10 W 5 ribbon is an amorphous–crystalline composite structure with good ductility, and the hardness of the amorphous–crystalline composite is about 75% higher than that of master ingot. The simulation mechanical properties are in good agreement with the results of nanoindentation at the nanoscale.
30
Stabilization of metallic supercooled liquid and bulk amorphous alloys
Akihisa Inoue · Acta Materialia · 2000 · 5.8K citations
Sample Dimensions Influence Strength and Crystal Plasticity
Michael D. Uchic, Dennis M. Dimiduk, J.N. Florando et al. · Science · 2004 · 2.3K citations
Natural Sciences, Materials Engineering, Materials Science +17
The fracture of bulk metallic glasses
Baoan Sun, W.H. Wang · Progress in Materials Science · 2015 · 517 citations
Natural Sciences, Materials Engineering, Materials Science +12