IEEE Transactions on Instrumentation and Measurement · 2018 · 30 citations · 30 references
EngineeringChemistryMaterials SciencePhotonicsPolymer ChemistrySensorsChemical SensorsOptical FibersOptical PolymersOptical SensingOptical SensorsSensor MaterialsChemical Optical SensorsMolecularly Imprinted Polymer SensorsNanoparticlesOptical Chemical SensingOptical DetectionPlastic Optical FibersPolyethylene TerephthalateSensing In Aqueous Media
A novel optical platform has been used to monitor the interaction between a molecularly imprinted polymer (MIP) and a small molecule. The new optical sensor is made of a polyethylene terephthalate substrate with a pattern of silver nanoparticles, printed on it by inkjet technology, and two plastic optical fibers (POFs). The POFs connect the optical sensor, later covered by the MIP layer, with a light source and with a spectrometer. The detection of furfural (furan-2-carbaldehyde, 2-FAL) in aqueous media was investigated exploiting a selective MIP receptor. The experimental results show that this novel approach presents a limit of detection of about 0.03 ppm, comparable to that of plasmonic sensors combined with the same MIP, but with the advantage of an easier preparation procedure.
30
Optical Sensors Based on Plastic Fibers
Lúcia Bilro, Nélia Alberto, João L. Pinto et al. · Sensors · 2012 · 344 citations · Full text
Low Cost Sensors Based on SPR in a Plastic Optical Fiber for Biosensor Implementation
Nunzio Cennamo, D. Massarotti, Laura Conte et al. · Sensors · 2011 · 316 citations · Full text
Fabrication of an ammonia gas sensor using inkjet-printed polyaniline nanoparticles
Karl Crowley, Aoife Morrin, A. Hernández et al. · Talanta · 2008 · 229 citations · Full text