Investigations of geopolymeric mixtures based on phosphate washing waste

Abstract

The extraction of the phosphate ore produces a high amount of waste causing serious environmental problems. This waste, termed as phosphate washing waste, was filtered and dried at 105 °C for 24 h to remove the water. The dried waste was milled and then sieved in a 100 μm sieve. The resulting phosphates washing waste (PWW) particles size are below 70 μm. The phosphate washing waste was calcined at 700 °C and 900 °C. Both calcined and uncalcined waste were investigated with X-ray fluorescence (XRF), X-ray powder diffraction (DRX), Fourier transform infrared (FTIR), simultaneous differential thermal and thermogravimetric analyses (DTA-TG) and particle size analysis. This waste was activated with sodium hydroxide (NaOH) and sodium silicate in order to produce geopolymeric materials. The influence of replacing PWW by 15% of metakaolin was also study. The results show that the highest compressive strength is obtained with metakaolin. The results also showed that compressive strength decreased with the increase of NaOH concentration.