Hormigón y Acero · 2018 · 37 citations · 19 references
EngineeringCivil EngineeringMaterials EngineeringMechanical Behavior Of MaterialsStructural AnalysisStructural EngineeringConcrete ConstructionConcrete MaterialsConcrete TechnologyFiber-reinforced CompositesReinforced Concrete StructuresStress-strain BehaviorCompressive StrainConcrete Compressive StrengthConcrete Constitutive ModelsLinear Structural AnalysisNonlinear Analysis Of Composite StructuresNonlinear Stress-strain ResponseReinforced Concrete
A model for non-linear calculations of steel fiber-reinforced concrete (SFRC) elements in compression is proposed and described technologically. The same curve produced by Eurocode 2 (EC2) is used until compressive strength, although non-dimensional variables refer to fiber concrete parameters. Beyond the peak, we use a parabola that is derived so that the average energy consumption of the material equals this same mean energy obtained from a database comprised of 197 tests. Estimates for the compressive strength of SFRC and the corresponding critical strain are also provided by correlation with the database using the surface response methodology. The total energy consumption of SFRC in compression is approximately four times higher on average than the corresponding energy of the base plain concrete, which is included in the model. Therefore, it can considerably improve the modeling of ductility in SFRC structures.© 2018 Asociación Española de Ingeniería Estructural (ACHE). Published by Elsevier España, S.L.U. All rights reserved.
19