Brazilian Dental Journal · 2018 · 54 citations · 23 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMaterials CharacterizationAdhesive BondingCementitious MaterialsCeramic BondingDental CementsDental CeramicsAcid-etched GlassAdhesion To Dental CeramicsAdhesive Cementation Of CeramicsBond StrengthBonding To Dental CeramicsBonding To Lithium DisilicateHydrofluoric Acid TreatmentResin-cement Adhesion
This study evaluated the effect of different hydrofluoric acid (HF) concentrations on the bond strength between a lithium disilicate-based glass ceramic and a resin cement. Eighty ceramic-blocks (12×7×2 mm) of IPS e.Max CAD (Ivoclar Vivadent) were produced and randomly assigned to 8 groups, considering 2 study factors: HF concentration in 4 levels, i.e., 1% (HF1), 3% (HF3), 5% (HF5), and 10% (HF10), and storage in 2 levels, i.e., baseline (tests were performed 24 h after cementation), and aged (storage for 150 days + 12,000 thermal-cycles at 5°C and 55°C). Acid etching (20 s) was performed, followed by washing, drying, and silanization. Four resin cement cylinders (ϕ= 0.96 mm) were built-up from starch matrices on each ceramic sample (n= 40). Additional ceramic samples were etched and analyzed for contact angle, micro-morphology, and roughness. In baseline condition (without aging), the HF3, HF5, and HF10 groups showed similar bond strength values (13.9 - 15.9 MPa), and HF1 (11.2 MPa) presented lower values than HF5, being that statistically different (p= 0.012). After aging, all the mean bond strengths statistically decreased, being that HF3, HF5, and HF10 (7.8 - 11 MPa) were similar and higher than HF1 (1.8 MPa) (p= 0.0001). For contact angle, HF3, HF5, and HF10 presented similar values (7.8 - 10.4°), lower than HF1 and CTRL groups. HF5 and HF10 presented rougher surfaces than other conditions. For better bond strength results, the tested ceramic may be etched by HF acid in concentrations of 3%, 5%, and 10%.
23
Laura Roland, Michael Grau, Julia Matena et al. · International Journal of Molecular Sciences · 2015 · 862 citations · Full text
An introduction to silanes and their clinical applications in dentistry.
JP Matinlinna, Lippo Lassila, Mutlu Özcan et al. · PubMed · 2004 · 417 citations · Full text
Dentistry, Dental Materials Science, Restorative Dentistry +13
Aline Scalone Brentel, Mutlu Özcan, Luiz Felipe Valandro et al. · Dental Materials · 2007 · 197 citations
Natural Sciences, Materials Engineering, Materials Science +17
Lucas Villaça Zogheib, Álvaro Della Bona, Estevão Tomomitsu Kimpara et al. · Brazilian Dental Journal · 2011 · 190 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17