IOP Conference Series Materials Science and Engineering · 2018 · 10 citations · 7 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsComposite MaterialsPolymer AdditivesPolymer BlendsPolymer CharacterizationPolymer CompositesPolymer ProcessingBlend CompatibilityCompatibilizationCompatibilizersImpact StrengthPolymer BlendingPolymer Blends MorphologyTensile StrengthTwin-screw Extrusion
Blending the existing polymers have an added advantage over the conventional polymers. However, compatibility of the materials is a problem. In this study, metacrylate butadiene styrene (MBS) and polypropylene-graft-maleic anhydride (PP-g-MA) were added as a single compatibilizer on polycarbonate/poly(acrylonitrile-butadiene-styrene) blends (PC/ABS). The effects of the compatibilizer addition on the mechanical and morphological properties were investigated. The PC/ABS blends were prepared in various compositions of 70/30, 60/40, 50/50 with fixed 2 phr MBS or PP-g-MA. PC/ABS blends were prepared by using twin-screw extruder, and test samples by injection molding. Results indicated that MBS exhibited higher tensile strength, hardness, and density, but lower impact strength and elongation compared with PP-g-MA. The tensile strength, elongation, and hardness tended to increase with increasing PC content; however, the impact strength was almost the same. Scanning electron microscopic examination showed that PC/ABS blend compatibilized with PP-g-MA was more porous than the one with MBS. Based on the results, it was found that PP-g-MA was a more effective compatibilizer for the PC/ABS 70/30 blend than MBS. The values of tensile strength, hardness, elongation, density, and impact strength were 602 kg/cm2, 79.1 Shore A, 15.3 %, 1.05 g/cm3, and 5.5 kgf/cm respectively.
7
Alireza Farzadfar, Saied Nouri Khorasani, Shahla Khalili · Polymer International · 2013 · 53 citations
Natural Sciences, Materials Engineering, Materials Science +17
Lucas González, Pierre G. Lafleur, Tomás Lozano et al. · Polymer Composites · 2013 · 47 citations
Natural Sciences, Materials Engineering, Materials Science +17
In-Soo Han, Yun Kyun Lee, Heon Sang Lee et al. · Journal of Materials Science · 2014 · 46 citations
Natural Sciences, Materials Engineering, Materials Science +17