2018 · 18 citations · 5 references
EngineeringComputer EngineeringElectrical EngineeringAnalog ElectronicsCircuit TheoryMicroelectronicsAnalog Integrated CircuitsCmos Circuit DesignDigital Integrated CircuitsLow-noise Circuit DesignMixed-signal Integrated Circuit DesignNoise In Analog CircuitsBandwidthCmos Analog Integrated CircuitsCutoff FrequencyLow-noise Analog InterfacesNoise FloorNoise Performance AnalysisTransimpedance Amplifier DesignTransimpedance Amplifiers
In this paper, we present an integrator-differentiator transimpedance amplifier (TIA) featuring a multielement pseudo-resistor (MEPR) in the DC feedback path for improved noise performance in the presence of non-zero DC input currents. The presented prototype is implemented in a standard 180 nm CMOS technology and achieves an inband transimpedance of 10 MΩ over a 2.7 MHz signal bandwidth. The MEPR resistor in the DC servo loop can be tuned between 700 k Ω and 100 MΩ enabling a precise adjustment of the TIA's lower cutoff frequency. For a DC feedback resistance of 700 k Ω, the TIA provides an input referred noise floor of 180 fA/√Hz at zero input current, which only marginally increases to 220 fA/√Hz for the maximum bias current of 1 μA. The TIA consumes 0.6 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> of chip area and 18.5 mW of power from a 1.8 V supply.
5
Single-shot read-out of an individual electron spin in a quantum dot
J. M. Elzerman, Ronald Hanson, L. H. Willems van Beveren et al. · Nature · 2004 · 1.7K citations · Full text
Natural Sciences, Physics, Photonics +14
Nanoscale live-cell imaging using hopping probe ion conductance microscopy
Pavel Novák, Chao Li, Andrew Shevchuk et al. · Nature Methods · 2009 · 518 citations · Full text