Polymer International · 2018 · 44 citations · 50 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsComposite MaterialsDynamic Mechanical AnalysisHigh-performance PolymersPolymer BlendsPolymer CharacterizationPolymer RheologyDynamic Mechanical CharacterizationDynamic Mechanical PropertiesElastic ModulusImpact StrengthNatural RubberPoly(lactic Acid)Rheological BehaviorRheology Of Blends
Abstract Attempts have been made to prepare high‐performance bio‐based blends through blending of poly(lactic acid) (PLA) with natural rubber (NR) in the presence of epoxidized natural rubber (ENR) as a compatibilizer. The prepared samples were characterized using differential scanning calorimetry, measuring the tensile properties and impact resistance, scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy and dynamic mechanical analysis (DMTA). Morphological studies revealed a matrix‐dispersed morphology for all blends, in which the average droplet size significantly decreased with the use of ENR. The elongation at break and impact strength of the blend containing 3 wt% ENR were 45 and 16 times those of neat PLA, respectively. These values are significantly higher than those previously reported for various simple and dynamically vulcanized rubber‐toughened PLAs. The influence of ENR on compatibility was confirmed by rheological tests, FTIR spectra and DMTA. DMTA also showed a marked increase in elastic modulus for the blend in the presence of 3 wt% ENR. The tensile properties and impact resistance were directly dependent on the ENR content and rubber droplet size. © 2018 Society of Chemical Industry
50
Mukesh Kumar, Smita Mohanty, S. K. Nayak et al. · Bioresource Technology · 2010 · 454 citations
Natural Sciences, Materials Engineering, Materials Science +14