Broadband near-infrared light source derived from Cr<sup>3+</sup>-doped phosphors and a blue LED chip

Qiyue Shao, Hao Ding, Leqi Yao, Junfeng Xu, Chao Liang, Zhi‐Hua Li, Yan Dong, Jianqing Jiang

Optics Letters · 2018 · 99 citations · 16 references

Concepts

Abstract

NIR-emitting YAl3(BO3)4:Cr3+/Yb3+ (YAB:Cr/Yb) and NaScSi2O6:Cr3+ (BSSO:Cr) phosphors were demonstrated as luminescent converters for broadband NIR phosphor-converted LEDs (pc-LEDs). YAB:Cr/Yb phosphors show emissions in 670&#x2013;800&#x00A0;nm (Cr3+ emission) and 950&#x2013;1050&#x00A0;nm (Yb3+ emission) upon excitation at 450&#x00A0;nm. In the BSSO host, Cr3+ ions occupy Sc3+ sites with relatively weak crystal field, and thus a broadband Cr3+ emission at longer wavelengths of 750&#x2013;950&#x00A0;nm is found for BSSO:Cr phosphors. Moreover, temperature-dependent spectral studies indicate that both YAB:Cr/Yb and BSSO:Cr phosphors exhibit good thermal stability, and more than 80% of the initial emission intensities can be sustained at 150&#x00B0;C. A NIR pc-LED prototype was fabricated by integrating these two phosphors with a blue LED chip (&#x223C;450&#x2009;&#x2009;nm), which generated a broadband emission in the NIR spectral range from 780 to 1050&#x00A0;nm. A NIR light output power of &#x223C;26&#x2009;&#x2009;mW was achieved at the injection current of 100&#x00A0;mA, with the corresponding energy conversion efficiency of &#x223C;8.6%.

References

16