1c:I[419806,["/_next/static/chunks/bb923814e1f4d2e9.js","/_next/static/chunks/dd3ee9f5b7716ca6.js","/_next/static/chunks/4204a0ae82542ca8.js","/_next/static/chunks/1270dead247da766.js","/_next/static/chunks/6e1aa89a642f40be.js","/_next/static/chunks/2d7aa753e81324a8.js","/_next/static/chunks/8ffd0b71567920d8.js","/_next/static/chunks/67ea6dfd21f16c5f.js","/_next/static/chunks/24eb4379f68013fd.js","/_next/static/chunks/b8cd775ffdf935bd.js","/_next/static/chunks/983103cd9eb7b428.js","/_next/static/chunks/263f2cdcb9aa2341.js","/_next/static/chunks/294b9525248c8e5f.js"],"default"] 1d:T55f,A strategy to prepare flexible and conductive MXene/graphene (reduced graphene oxide, rGO) supercapacitor electrodes by using electrostatic self‐assembly between positively charged rGO modified with poly(diallyldimethylammonium chloride) and negatively charged titanium carbide MXene nanosheets is presented. After electrostatic assembly, rGO nanosheets are inserted in‐between MXene layers. As a result, the self‐restacking of MXene nanosheets is effectively prevented, leading to a considerably increased interlayer spacing. Accelerated diffusion of electrolyte ions enables more electroactive sites to become accessible. The freestanding MXene/rGO‐5 wt% electrode displays a volumetric capacitance of 1040 F cm −3 at a scan rate of 2 mV s −1 , an impressive rate capability with 61% capacitance retention at 1 V s −1 and long cycle life. Moreover, the fabricated binder‐free symmetric supercapacitor shows an ultrahigh volumetric energy density of 32.6 Wh L −1 , which is among the highest values reported for carbon and MXene based materials in aqueous electrolytes. This work provides fundamental insight into the effect of interlayer spacing on the electrochemical performance of 2D hybrid materials and sheds light on the design of next‐generation flexible, portable and highly integrated supercapacitors with high volumetric and rate performances.1e:T453,Since the discovery of graphene, the quest for two-dimensional (2D) materials has intensified greatly. Recently, a new family of 2D transition metal carbides and carbonitrides (MXenes) was discovered that is both conducting and hydrophilic, an uncommon combination. To date MXenes have been produced as powders, flakes, and colloidal solutions. Herein, we report on the fabrication of ∼1 × 1 cm² Ti₃C₂ films by selective etching of Al, from sputter-deposited epitaxial Ti₃AlC₂ films, in aqueous HF or NH₄HF₂. Films that were about 19 nm thick, etched with NH₄HF₂, transmit ∼90% of the light in the visible-to-infrared range and exhibit metallic conductivity down to ∼100 K. Below 100 K, the films' resistivity increases with decreasing temperature and they exhibit negative magnetoresistance-both observations consistent with a weak localization phenomenon characteristic of many 2D defective solids. This advance opens the door for the use of MXenes in electronic, photonic, and sensing applications.1f:T8cc,

	Year	Citations

References