Journal of Polymers and the Environment · 2018 · 24 citations · 22 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer EngineeringPolymer MaterialsBio-based MaterialsBiodegradable PolymersBiodegradationComposite MaterialsPolymer CompositesBiodegradable Polymer CompositesFillersNatural Fiber CompositesNatural Fiber Reinforced CompositesPoly(lactic Acid)Tensile LoadingTensile TestingThermal Properties
Biodegradable and ecologically friendly polymer materials attract great attention of many scientific groups in the world as they fit well in the sustainable development policy and are considered to be “a right thing to do” by the general public. Such polymers can be modified by the addition of different fillers, favorably of natural origin. In the paper we provide a comparison between composites based on two biodegradable polymers: poly(lactic acid)—biodegradable, natural stock polymer and poly(butylene succinate)—biodegradable polymer produced from fossil based materials. For each polymer we have prepared a series of composites with different fibres (natural: hemp and flax, and manmade: Cordenka) and different filler loadings. To fully characterize obtained materials thermal, mechanical and surface free energy measurements were performed, completed with morphology observations and an attempt to compare the experimental data for tensile measurements with values obtained using the modified rule of mixtures. The tensile results calculated using the modified rule of mixture for below 30% fibre loading are found to be fitting the experimental data. Composites mechanical properties and morphology were strongly affected by the type of fibre used and its loading, however thermal properties remained almost unchanged. In specific, Cordenka fibres tend to form bunches which presence greatly influences the mechanical properties but still our studies have shown clear advantage of manmade Cordenka fibres over the hemp and flax fibres when considering distribution and fibre–polymer interaction.
22
Petal Effect: A Superhydrophobic State with High Adhesive Force
Feng Lin, Yanan Zhang, Jinming Xi et al. · Langmuir · 2008 · 1.9K citations
Natural Sciences, Materials Engineering, Materials Science +15