Loss Analysis of a Direct-Injection Hydrogen Combustion Engine

Kevin Klepatz, Hermann Rottengruber, Stephan Zeilinga, Daniel Koch, Werner Prümm

SAE technical papers on CD-ROM/SAE technical paper series · 2018 · 31 citations · 1 references

Concepts

Abstract

<div class="section abstract"><div class="htmlview paragraph">In the discussion on the reduction or complete avoidance of CO<sub>2</sub>-emissions and other pollutants in the transport sector, hydrogen as a carbon-free fuel, is an alternative to conventional fuels. The use of hydrogen in modern internal combustion engines offers a fast and cost-effective opportunity of decarbonisation of the transport sector.</div><div class="htmlview paragraph">The utilisation of hydrogen as fuel in internal combustion engine systems is more challenging than using conventional fuels. Hydrogen is highly flammable, which affects the requirements of the ignition system and the design of the combustion chamber. In addition, due to the gaseous state of H<sub>2</sub> the question, how the fuel should be delivered to the combustion chamber is of high importance by means of engine performance. There are two fundamentally different concepts for hydrogen injection. Hydrogen can be injected by a multi-point injection into intake manifold by external mixture-formation (MPI) or directly into the combustion chamber (DI). When external mixture-formation is used, backfiring due to pre-ignition caused by local hotspots, has to be avoided. Furthermore, fuel backflows can occur as a result of pressure fluctuations which lead to inhomogeneous fuel distribution in the combustion chambers. Due to its low density, hydrogen expands strongly when it is injected in the intake manifold, resulting in fresh air displacement by hydrogen. Hereby effective the delivery rate of the internal combustion engine is significantly lowered.</div><div class="htmlview paragraph">By using H<sub>2</sub> direct injection, the effect on the filling losses above mentioned are avoided. Due to the specific properties of hydrogen, the fuel preparation is quite complex. According to [<span class="xref">1</span>], the performance advantage by using a direct injection of H<sub>2</sub> compared to a gasoline engine with port injection is 15%. In order to exploit the entire efficiency potential, it is eminent that the H<sub>2</sub> injection takes place directly into the combustion chamber. Injection timing could be identified “as dominating influence factor [for] the combustion process and the resulting emissions” [<span class="xref">2</span>]. So for an optimized engine performance of an H<sub>2</sub>-DI engine, injection timing and injection strategy are crucial. The main focus of this study is an analysis of thermodynamic and mechanic losses of the H<sub>2</sub>-DI engine process to compare the efficiencies of DI with H<sub>2</sub>-MPI and Diesel compression-ignition (CI)-operation. For this purpose, a one-dimensional H<sub>2</sub>-DI simulation model was developed. The model is based on measured data of a H<sub>2</sub>-MPI engine which was derived from a commercial Diesel engine.</div></div>

References

1