Mechanika · 2018 · 15 citations · 9 references
AgricultureAgricultural EngineeringBiosystems EngineeringBiomechanicsCereal ScienceEquipmentLoad TransferTorque ControlFeed Rate ControlFiller MaterialsMachine DynamicsSpeed-torque CharacteristicsThreshing MachineryThreshing MechanismsTorqueTorque Output
Corn ear feed rate variations in the threshing-separation unit of a combine harvester have a significant impact on the dynamic indicators of the threshing process. In this study, we conducted experiments using a stationary tangential threshing device and measured the forces acting on the rear part of the concave as well as the torque of the rotating cylinder during a threshing process. The ThreshLab software was developed for this purpose. We found that increasing the corn ear feed rate made the threshing process more even, due to decreasing the fluctuation of forces acting on the rear part of the concave and torque of the rotating cylinder. The corn ear threshing process may be more stable if the threshing cylinder is fitted with filler plates (FP-II). A comparison of the results obtained for variations in the forces acting on the rear part of the concave with those obtained for variations in the total torque of resistance and the speed of the threshing cylinder revealed a linear correlation between these parameters at varied feed rates. DOI: http://dx.doi.org/10.5755/j01.mech.24.4.20721
9
A Review of Combine Sensors for Precision Farming
P. Reyns, B. Missotten, Herman Ramón et al. · Precision Agriculture · 2002 · 107 citations
Agriculture, Agricultural Engineering, Precision Agriculture +10
The experimental research of combine harvesters
L. Špokas, Valerii Adamčuk, Volodymyr Bulgakov et al. · Research in Agricultural Engineering · 2016 · 52 citations · Full text
Agriculture, Agronomy, Crop Sciences +13