Science and Engineering of Composite Materials · 2018 · 26 citations · 22 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsStructural MaterialsComposite MaterialsMaterial PerformanceMaterial PropertiesMechanics Of Composite MaterialsReinforcement MaterialsStrength Of MaterialsAluminum Matrix CompositesComposite Mechanical PropertiesContinuous CastingHot RollingImpact StrengthMetal-ceramic CompositesTensile StrengthUltimate Tensile Strength
Abstract Reinforcement particle size is very important for the performance of metal ceramic composites. This work studied the influence of B 4 C particle size on the mechanical properties of Al matrix layered composites. These composites were fabricated using a simplified semicontinuous casting and hot-rolling process. To obtain an optimized filling structure of particles, Horsfield filling principle was applied to determine the size and mass fraction of B 4 C particles. Four sizes of B 4 C particles were used with various combinations. The results showed that with the increase of the B 4 C particle size and fine B 4 C mass fraction, the hardness of the composites decreases whereas the impact strength and ultimate tensile strength increase. The residual stress at interface should be responsible for the variation in properties. Besides, the interparticle distance also contributes to the change in impact strength and ultimate tensile strength.
22
Seyed Abdolkarim Sajjadi, H.R. Ezatpour, M. Torabi Parizi · Materials & Design (1980-2015) · 2011 · 624 citations
Natural Sciences, Materials Engineering, Materials Science +15