IEEE Transactions on Biomedical Circuits and Systems · 2018 · 35 citations · 13 references
EngineeringBioengineeringBiomedical EngineeringBiosensorsNeural EngineeringSensorsImplantable Biomedical DevicesImplantable MicrodevicesImplantable MicrosystemsImplantable Neural DevicesIntracranial Pressure MonitoringMedical InstrumentationImplantable Pressure SensorsImplantable SensorsIntracranial Pressure Monitoring DevicesPressure SensingPressure Sensing SystemsWireless Pressure SensorsWireless SensingWireless Transmission
A wireless intracranial pressure (ICP) monitoring system based on the air pressure sensing is proposed in this work. The proposed system is composed of an implantable ICP sensing device and a portable wireless data recorder. The ICP sensing device consists of an air pressure sensor, an ultra-thin air pouch for pressure sensing, and a low-power dedicated system-on-a-chip (SoC) for the data acquisition control and wireless transmission. The SoC consists of a power management unit, a wake-up controller, the sensor interface, a wireless transmitter, and the workflow control logic. The SoC is fabricated in 0.18 μm CMOS technology with a die area of 3.04 mm × 2 mm. Experimental results show that the prototype implantable ICP device has achieved a resolution of 0.2 mmHg and a battery lifetime of 1 week with a 3 V 50 mAh battery. The ICP device has been tested in the liquid environment. The nonlinearity error is less than ±0.4 mmHg for the full measurement range of -20 to +150 mmHg. Compared to the other implantable wireless ICP solutions in the literature, the proposed system alleviates the biocompatibility issue and increases the measurement accuracy.
13
Guidelines for the Management of Severe Traumatic Brain Injury, Fourth Edition
Nancy Carney, Annette M Totten, Cindy O’Reilly et al. · Neurosurgery · 2016 · 4.3K citations