Propellants Explosives Pyrotechnics · 2018 · 37 citations · 12 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials ChemistryPolymer ChemistryPolymer MaterialsComposite MaterialsHigh-performance PolymersInk PropertiesNanocompositesPolymer CharacterizationDetonationDetonation VelocityDirect Ink WritingDirect WritingImpact SensitivitySensitivityThermal DecompositionThermal Stability
Abstract Direct ink writing (DIW) of energetic materials has been an area of interest for micro size charge. In this work, 3, 4‐dinitrofurazanofuroxan (DNTF) based composite was prepared with nitrocotton (NC) and Viton as binders by DIW. Scanning Electro Microscope (SEM) and X‐ray diffraction were employed to characterize the composite samples. The impact sensitivity and thermal decomposition of the composites were also tested and analyzed. In addition, the critical size of detonation and detonation velocity were measured. The results show that DNTF based composite has a high density with whose value is 1.785 g cm −3 , reaching 93.16 % of theoretical maximum density (TMD). The particles in composites are spheroidal with size ranging from 1 to 2 μm. Compared with raw DNTF, the obtained composite has a lower impact sensitivity and higher thermal stability. Moreover, the composites exhibit excellent detonation properties, whose critical size of detonation is around 0.01 mm and the mean detonation velocity is 8580 m s −1 at the charging width of 1 mm. Furthermore, part performances of this composite are contrasted with previous reported CL‐20 based composite and show better characters.
12
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Bok Yeop Ahn, Eric B. Duoss, Michael J. Motala et al. · Science · 2009 · 1.2K citations
Recent development on preparation of ceramic inks in ink-jet printing
Zhidong Pan, Yanmin Wang, Huining Huang et al. · Ceramics International · 2015 · 96 citations