Nature Communications · 2018 · 238 citations · 41 references
EngineeringMaterials EngineeringMaterials ScienceNanomaterialsNanotechnologyRadiation DetectionDetector TechnologyInorganic NanoparticlesOrganic SemiconductorsSemiconductor DetectorsX-ray DetectionX-ray DetectorsCoin Cell BatteriesDetector MaterialsDetectorsHeterojunction DevicesPhoton DetectorsSolid-state DetectorsX-ray Attenuation Coefficients
Abstract X-ray detectors are critical to healthcare diagnostics, cancer therapy and homeland security, with many potential uses limited by system cost and/or detector dimensions. Current X-ray detector sensitivities are limited by the bulk X-ray attenuation of the materials and consequently necessitate thick crystals (~1 mm–1 cm), resulting in rigid structures, high operational voltages and high cost. Here we present a disruptive, flexible, low cost, broadband, and high sensitivity direct X-ray transduction technology produced by embedding high atomic number bismuth oxide nanoparticles in an organic bulk heterojunction. These hybrid detectors demonstrate sensitivities of 1712 µC mGy −1 cm −3 for “soft” X-rays and ~30 and 58 µC mGy −1 cm −3 under 6 and 15 MV “hard” X-rays generated from a medical linear accelerator; strongly competing with the current solid state detectors, all achieved at low bias voltages (−10 V) and low power, enabling detector operation powered by coin cell batteries.
41
Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limit
Weicheng Pan, Haodi Wu, Jiajun Luo et al. · Nature Photonics · 2017 · 1.4K citations
Natural Sciences, Materials Engineering, Materials Science +14
Radiation detection and measurement
M.C. Scott · Annals of Nuclear Energy · 1980 · 1.2K citations
Printable organometallic perovskite enables large-area, low-dose X-ray imaging
Yong Churl Kim, Kwang Hee Kim, Dae‐Yong Son et al. · Nature · 2017 · 1.2K citations