Energies · 2018 · 22 citations · 29 references
EngineeringEnvironmental EngineeringMechanical EngineeringBuilding PhysicsHeat TransferThermal AnalysisBuilding Thermal PerformanceHeat Transfer In BuildingsHvac System DesignIndoor Thermal EnvironmentTemperature MeasurementThermal PerformanceAir Temperature MeasurementError Rate MetricsFeasibility Study DesignIn Situ MeasurementIn-situ MeasurementsIn-situ Thermal TestingMeasurement AccuracySurface Temperature
This paper reports on a feasibility study conducted to improve the in situ measurement accuracy of the air-surface temperature ratio (ASTR) method. The measured relative error rate was analyzed using the ISO 6946 [7.69 W/(m2·K)] and Korea Energy Saving Design Standard [9.09 W/(m2·K)] indoor total surface heat transfer coefficients. The relative error rate was analyzed according to fluctuations in outdoor temperature data. The relative error rate obtained using the ISO 6946 standard was analyzed about 6.3% and that obtained using the Korea Energy Saving Design Standard was about 9.5%. The relative error rate measured for outdoor temperature fluctuations of less than 1 K was about 4.62% and that for temperatures greater than 1 K was about 14.31%. The study results confirmed the cause of the error in the measurement of the ASTR. It was also found that the accuracy of the latter can be improved when the ISO 6946 indoor total surface heat transfer coefficient is applied and when outdoor temperature fluctuations less than 1 K are sampled and analyzed.
29
U-value in situ measurement for energy diagnosis of existing buildings
Giorgio Ficco, Fabio Iannetta, Elvira Ianniello et al. · Energy and Buildings · 2015 · 226 citations