High-Voltage Gain Quasi-SEPIC DC–DC Converter

Abstract

This paper proposes a modified coupled-inductor SEPIC dc-dc converter for high-voltage-gain (2 <; G <; 10) applications. It utilizes the same components as the conventional SEPIC converter with an additional diode. The voltage stress on the switch is minimal, which helps the designer to select a low-voltage and low RDS-ON MOSFET, resulting in a reduction of cost, conduction, and turn ON losses of the switch. Compared to equivalent topologies with similar voltage-gain expression, the proposed topology uses lower component count to achieve the same or even higher voltage gain. This helps to design a very compact and lightweight converter with higher power density and reliability. Operating performance, steady-state analysis and mathematical derivations of the proposed dc-dc converter have been demonstrated in this paper. Moreover, extension of the circuit for higher gain (G > 10) application is also introduced and discussed. Finally, the main features of the proposed converter have been verified through simulation and experimental results of a 400-W laboratory prototype. The efficiency is almost flat over a wide range of load with the highest measured efficiency of 96.2%, and the full-load efficiency is 95.2% at a voltage gain of 10.