2018 5th International Conference on Business and Industrial Research (ICBIR) · 2018 · 16 citations · 1 references
EngineeringIndustrial EngineeringMechanical EngineeringEquipmentMetrologyVibrationCondition MonitoringFault DetectionFrequency-domain AnalysisMachine VibrationVibration MeasurementVibration MonitoringAccelerometer MonitoringAccelerometer SensorsBearing Condition MonitoringBearing Fault DiagnosisBearing FaultsBearing VibrationBearing-related VibrationFast Fourier Transform
Ball bearing is one of the main components in machinery. The monitoring technique of ball bearing is typically used accelerometer to detect vibration signal. The detected signal is analysed using frequency domain technique known as Fast Fourier Transform (FFT). However, the basic of signal analysis is needed to describe the useful information from signals. This study was introduced technique to compare power of the main frequency components related to the moving parts of ball bearing such as Ball Pass Frequency of Inner race (BPFI), Ball Pass Frequency of Outer race (BPFO) and Ball Defect Frequency (BDF). Ball bearing was simulated with various conditions such as inner race defect, outer race defect and bearing with polishing grease-based compound of grit 400, 280 and 100. It is found that the comparison of power of BPFI, BPFO and BDF can be used to describe the states of ball bearing. The 3D plot of these main frequencies could be used to monitor the trend of bearing fault conditions.
1