Combustion Explosion and Shock Waves · 2018 · 26 citations · 9 references
EngineeringChemical EngineeringChemistryCombustionPhysical ChemistryCombustion FundamentalsDetonation TheoryGas-phase Reaction KineticsBinary MixturesDetonationDetonation CharacteristicsDetonation In GasesReaction Kinetics Of Detonation
Detonation in mixtures of acetylene, ethylene, and propylene with oxygen in the range of fuel component concentrations with possible formation of carbon condensate in detonation products is studied both experimentally and theoretically. In contrast to the traditional method of studying detonation in a quiescent mixture located in a closed tube, the present investigations are performed in a tube with an open end (for exhaustion of detonation products) under the conditions of separate injection of the components and their mixing after injection into the detonation tube through the ignition chamber. The components are injected into the tube from a computercontrolled multichannel system of gas injection of the CCDS2000 detonation spraying setup. The detonation cell size and detonation velocity are measured; these parameters are also calculated by the BEZOPASNOST (SAFETY) computer program. A comparison of the computed and experimental dependences testifies to a complicated character of transformation of detonation products from a purely gaseous to heterogeneous state and to its effect on the detonation wave.
9
Autoignition in methanehydrogen mixtures
R.K. Cheng, A. K. Oppenheim · Combustion and Flame · 1984 · 164 citations
H. Gg. Wagner · Symposium (International) on Combustion · 1979 · 142 citations