Scientific Reports · 2018 · 15 citations · 29 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMaterials ChemistryCast GlassCeramic ProcessingCrystallization AnalysisCrystallization ProcessesGlass CastingGlass MaterialsCeramic SynthesisCrystallization In GlassElectron Backscatter DiffractionEnergy Dispersive X-ray SpectroscopyEnergy-dispersive X-ray SpectroscopyGlass-ceramic ProcessingGlass-ceramicsX-ray Diffraction Analysis
Abstract A glass melt with the composition 24Bi 2 O 3 /40TiO 2 /10SiO 2 /10Nd 2 O 3 /16 Al 2 O 3 was prepared and rapidly quenched between two copper blocks (sample A). A part of this glass was subsequently crystallised at 800 °C for 8 h (sample B). For the preparation of another two samples, the melt was slowly cooled on a cooper plate (sample C) or cast into a graphite mould and subsequently thermally treated at 300 °C for 3 h (sample D). As shown by X-ray diffraction (XRD) and scanning electron microscopy (SEM) including energy dispersive X-ray spectroscopy (EDXS) and electron backscatter diffraction (EBSD) measurements, the rapidly cooled samples contained notable amounts of uncrystallised glassy phase next to the Aurivillius phase Bi 4 Ti 3 O 12 . The latter occurred in higher concentrations in all other samples and formed oriented layers. Minor concentrations of Bi 2 Al 4 O 9 and Al 2 O 3 were also detected in the microstructure.
29
A general mechanism of polycrystalline growth
László Gránásy, Tamás Pusztai, Tamás Börzsönyi et al. · Nature Materials · 2004 · 358 citations
Natural Sciences, Materials Engineering, Materials Science +11
Wei Wei, Ying Dai, Baibiao Huang · The Journal of Physical Chemistry C · 2009 · 228 citations
Natural Sciences, Materials Engineering, Materials Science +17