Journal of Manufacturing Science and Engineering · 2018 · 15 citations · 28 references
Natural SciencesMaterials EngineeringMaterials ScienceAdditive ManufacturingMechanical Behavior Of MaterialsStructural MaterialsComposite Additive ManufacturingComposite MaterialsComposite StructuresComposites ManufacturingFiber-reinforced CompositesPolymer CompositesAdditive Manufacturing Of Lightweight StructuresAutoclave CuringBending StiffnessCarbon Fiber Reinforced PolymersHybrid Composite StructuresLightweight StructuresMechanical PerformanceSpecific Stiffness
This paper presents a study combining additive manufactured (AM) elements with carbon fiber-reinforced polymers (CFRP) for the autoclave curing of complex-shaped, lightweight structures. Two approaches were developed: First, structural cores were produced with AM, over-laminated with CFRP, and co-cured in the autoclave. Second, a functional hull is produced with AM, filled with a temperature- and pressure-resistant material, and over-laminated with CFRP. After curing, the filler-material is removed to obtain a hollow lightweight structure. The approaches were applied to hat stiffeners, which were modeled, fabricated, and tested in three-point bending. Results show weight savings by up to 5% compared to a foam core reference. Moreover, the AM element contributes to the mechanical performance of the hat stiffener, which is highlighted by an increase in the specific bending stiffness and the first failure load by up to 18% and 310%. Results indicate that the approaches are appropriate for composite structures with complex geometries.
28
Selective Laser Sintering of PEEK
Michael Schmidt, Dirk Pohle, Thomas Rechtenwald · CIRP Annals · 2007 · 294 citations