Desalination and Water Treatment · 2018 · 10 citations · 18 references
EngineeringChemical EngineeringEnvironmental EngineeringEnvironmental RemediationWastewater TreatmentWater TreatmentAdsorption ProcessesSludge DisposalWaste TreatmentAdsorbent CharacterizationAdsorption CapacityAdsorption Of FluorideAdsorption SitesFluoride ContaminationFluoride RemovalSorbent MaterialsToxicity Characteristic Testing
ABSTRACT The potential application of lime-sludge waste (LSW) from paper mills in removal of excess fluo-ride from water has been studied. Strings of batch experiments were carried out to assess the fluo-ride removal ability of dried micrometer-sized LSW in presence of phosphoric acid (PA) by varying operational parameters, viz., initial fluoride concentration, initial PA concentrations, contact time and adsorbent dose. The adsorption data fitted well to Freundlich model and pseudo-second-order kinetics. The mechanism of removal has been suggested as a combination of precipitation of fluorite and fluorapatite (FAP), and adsorption by hydroxyapatite (HAP). Fluoride was found to be reduced from initial 10 mg/L to less than 1 mg/L in 30 min. The maximum fluoride adsorption capacity of LSW was found to be 0.943 mg g –1 . The quality parameters of the treated water remain within WHO guidelines and the exhausted used LSW very well passes the toxicity characteristic leaching procedure test of the US-EPA. The study shows LSW, a waste material, as a potential sorbent for remediation of fluoride contaminated water.
18
Adsorption kinetics of fluoride on low cost materials
Xianfeng Fan · Water Research · 2003 · 602 citations
Natural Sciences, Chemical Engineering, Materials Science +14
Adsorption of fluoride from water by amorphous alumina supported on carbon nanotubes
Yanhui Li, Shuguang Wang, Anyuan Cao et al. · Chemical Physics Letters · 2001 · 416 citations · Full text