AIP Advances · 2018 · 14 citations · 25 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsMagnetic MaterialsMetallurgyFerromagnetic MaterialsFerromagnetismMagnetic CharacterizationMagnetic Properties Of SolidsPermanent MagnetsPowder MetallurgyAmorphous Phase ContentBall MillingMagnetic Materials CharacterizationMagnetic PropertiesMagnetic Property CharacterizationPowder Metallurgy Of MagnetsSintered MagnetsSpark Plasma Sintering
MnBi magnets with a high content of low temperature phase (LTP) and excellent magnetic properties were prepared by spark plasma sintering (SPS) using ball milling powders as precursors without magnetic purification. A complicated intergranular phase, which contains Mn phase, Bi phase, MnO phase, and even amorphous phase in MnBi magnets, was characterized and reported systematically. It was found that the formation of intergranular phase which was contributed by ball milling precursors and sintering mechanism, jointly, had important influence on the magnetic properties. The appropriate content of intergranular phase was beneficial in improving the coercivity due to the strong magnetic isolation effects. The optimum magnetic properties with Mr=26.0 emu/g, Hci= 7.11 kOe and (BH)max=1.53 MGOe at room temperature, and a maximum value Hci= 25.37 kOe at 550 K can be obtained. Strongly favorable magnetic properties make SPSed MnBi magnets an attractive candidate material for small permanent magnets used in high-temperature applications.
25
Strategy for high-coercivity Nd–Fe–B magnets
K. Hono, H. Sepehri‐Amin · Scripta Materialia · 2012 · 716 citations
Natural Sciences, Materials Engineering, Materials Science +10
Grain size dependence of coercivity of hot-deformed Nd–Fe–B anisotropic magnets
Jiangwei Liu, H. Sepehri‐Amin, Tadakatsu Ohkubo et al. · Acta Materialia · 2014 · 236 citations
Magnetic properties of MnBi prepared by rapid solidification
Xiaobin Guo, X. Chen, Z. Altounian et al. · Physical review. B, Condensed matter · 1992 · 164 citations