Journal of Physics Conference Series · 2018 · 12 citations · 9 references
Natural SciencesMaterials EngineeringMaterials ScienceEnergy MaterialsNanomaterialsNanotechnologyElectrode MaterialsMetal Oxide NanomaterialsPhotovoltaic DevicesPhotovoltaic MaterialsSolar Cell MaterialsSolar CellsDye-sensitized Solar CellsFilm ThicknessGlass ElectrodesNanocrystalline MaterialsNanoparticle Size EffectsSilicon Solar CellsSurface AreaTitanium Dioxide Nanoparticles
It became a great interest Dye-sensitized solar cells (DSSC) as a successful alternative to silicon solar cells in terms of cost and simplicity. These cells rely on a semi-conductive material of electricity TiO2 nanocrystalline which encapsulates glass electrodes from the connected side at a temperature 450°C. In this work, the effect of nanoparticle size shows the size of atoms. The smaller the size of the atoms, the greater the surface area and thus the sufficient absorption of the dye and the stimulation of electrons, where increasing surface area increases efficiency. Then a limited amount was added and at a certain concentration, which led to a reasonable improvement in efficiency. According to this procedure commercially available TiO2 (10 nm,25 nm,33 nm, 50 nm) standard. A TiO2 paste was prepared by mixing commercial TiO2, ethanol, distilled water, F:SnO2 (FTO film thickness 14 μm) conductive glasses. By using Dr. Blade method we got films with appropriate thicknesses, then by using several particle sizes (10 nm, 25 nm, 33 nm, 50 nm),many efficiencies were founded (2.39 %, 2.1 %,1.85 %,1.65%) respectively. Improved solar cell efficiency after addition of several chemical materials and the best that got is Cu (NO3)2. Efficiency became for (10 nm) (2.61 %, 2.34 %,2.1%,1.85%) respectively under 40 mW/cm2.
9
Progress on the electrolytes for dye-sensitized solar cells
Jihuai Wu, Zhang Lan, Sanchun Hao et al. · Pure and Applied Chemistry · 2008 · 286 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17