Materials · 2018 · 13 citations · 42 references
Natural SciencesMaterials EngineeringMaterials ScienceMetallic MaterialsMetallurgySolid MechanicsAlloysDeformation MechanismsPlastic DeformationPlasticityStainless SteelsStress-strain BehaviorDynamic Stress-strain BehaviorHigh-strain-rate DeformationHot Deformation BehaviorHot FormingLow-alloy SteelMaterial Behavior ModelingRecrystallizationRecrystallization Behavior
Austenitic Stainless Steels and High-Strength Low-Alloy (HSLA) steels show significant dynamic recovery and dynamic recrystallization (DRX) during hot forming. In order to design optimal and safe hot-formed products, a good understanding and constitutive description of the material behavior is vital. A new continuum model is presented and validated on a wide range of deformation conditions including high strain rate deformation. The model is presented in rate form to allow for the prediction of material behavior in transient process conditions. The proposed model is capable of accurately describing the stress⁻strain behavior of AISI 316LN in hot forming conditions, also the high strain rate DRX-induced softening observed during hot torsion of HSLA is accurately predicted. It is shown that the increase in recrystallization rate at high strain rates observed in experiments can be captured by including the elastic energy due to the dynamic stress in the driving pressure for recrystallization. Furthermore, the predicted resulting grain sizes follow the power-law dependence with steady state stress that is often reported in literature and the evolution during hot deformation shows the expected trend.
42
Physics and phenomenology of strain hardening: the FCC case
U.F. Kocks, H. Mecking · Progress in Materials Science · 2002 · 3.2K citations
On the mechanism of hot deformation
C.M. Sellars, W.J. McTegart · Acta Metallurgica · 1966 · 1.9K citations
Natural Sciences, Geology, Physics +12
The Avrami kinetics of dynamic recrystallization
John J. Jonas, Xavier Quelennec, Lan Jiang et al. · Acta Materialia · 2009 · 605 citations
Natural Sciences, Materials Engineering, Materials Science +14