Journal of Environmental Engineering · 2018 · 16 citations · 13 references
EngineeringChemical EngineeringEnvironmental EngineeringBioprocess EngineeringBioreactor DesignWastewater TreatmentBiological Treatment ProcessesBioreactor OperationMembrane Bioreactor SystemsNutrient RemovalWaste TreatmentWastewater BiotreatmentBiofilm ControlBiofilm ProcessesBiological Wastewater TreatmentChemical Oxygen DemandOrganic Matter RemovalRecirculationRecirculation Flow ControlRemoval
The control of biofilm thickness is one of the challenges of using the membrane aerated biofilm reactor (MABR) because high thicknesses block oxygen and substrates transferred to the biofilm layers, resulting in MABR performance decay. This research used two recirculation flow velocities for biofilm thickness control: 0.025 m/s in the first experiment and 0.065 m/s in the second experiment, and activity was evaluated through the chemical oxygen demand (COD) removal rate. In the MABR operated in sequential batches using raw domestic sewage, COD removal efficiencies of 56 and 83% were reached for the first and second recirculation velocities, with COD concentration in influent and effluent of 440 and 190 mg/L in the first experiment and 420 and 70 mg/L in the second experiment, respectively. Thus, the variation of the recirculation velocity was shown as an option for biofilm thickness control in MABR.
13
Akihiko Terada, Kazuaki Hibiya, Jun Nagai et al. · Journal of Bioscience and Bioengineering · 2003 · 225 citations
Kazuaki Hibiya, Akihiko Terada, Satoshi Tsuneda et al. · Journal of Biotechnology · 2002 · 208 citations
Engineering, Chemical Engineering, Environmental Engineering +16
COD and nitrogen removal by biofilms growing on gas permeable membranes
Michael J. Semmens, Karl Dahm, John W. Shanahan et al. · Water Research · 2003 · 191 citations
Shinya Matsumoto, Akihiko Terada, Satoshi Tsuneda · Biochemical Engineering Journal · 2007 · 155 citations