Journal of Separation Science · 2018 · 15 citations · 21 references
EngineeringChemical EngineeringEnvironmental EngineeringAnalytical ChemistryMembrane SciencePolymer ChemistryExtraction TechniquesMembrane FabricationPolymer MembranesPolymeric MembranesSolid-phase ExtractionSolvent ExtractionAnalytical Detection Of Organic PollutantsCellulose MembranesChemical PolymerizationExtraction EfficiencyExtraction Efficiency AssessmentPolycarbonatePolypyrroleWater Purification Membranes
In this study, a simple, efficient, and reusable device based on cellulose membranes modified with polypyrrole was developed to extract 14 emerging contaminants from aqueous matrices. For chemical polymerization, a low-cost cellulose membrane was immersed in 0.1 mol/L pyrrole and 0.5 mol/L ammonium persulfate for 40 min in an ice/water bath. The cellulose membranes modified with polypyrrole were accommodated in a polycarbonate holder suitable for solid-phase extraction disks. Solid-phase extraction parameters that affect extraction efficiency, such as sample volume, pH, flow rate, and desorption were optimized. Subsequently, determination of target compounds was performed by gas chromatography with mass spectrometry. The linear range for analytes ranged from 0.05 to 500 μg/L, with coefficients of determination above 0.990. The limits of quantification varied between 0.05 and 10 μg/L, with relative standard deviations lower than 17%. The performance of the proposed cellulose membranes modified with polypyrrole device for real samples was evaluated after extraction of emerging contaminants from a river water sample from the city of Curitiba, Brazil. Bisphenol A (6.39 μg/L), caffeine (17.83 μg/L), and paracetamol (19.28 μg/L) were found in these samples.
21
Sebastian Huntscha, Heinz Singer, Christa S. McArdell et al. · Journal of Chromatography A · 2012 · 241 citations