High-pressure Metal Hydride Tank for Fuel Cell Vehicles

Daisuke Mori, Katsuhiko Hirose, N. Haraikawa, Toshio Takiguchi, Tamio Shinozawa, Takuro Matsunaga, Keiji Toh, Kiyoshi Fujita, Atsuo Kumano, Hidehito Kubo

SAE technical papers on CD-ROM/SAE technical paper series · 2007 · 17 citations · 6 references

Concepts

Abstract

<div class="htmlview paragraph">High-pressure metal hydride (MH) tank has been designed based on a 35 MPa cylinder vessel. The heat exchanger module is integrated into the tank. Its advantage over high-pressure cylinder vessels is its large hydrogen storage capacity, for example 9.5 kg with a tank volume of 180 L by Ti<sub>25</sub>Cr<sub>50</sub>V<sub>20</sub>Mo<sub>5</sub> alloy. Cruising range is about 900 km, over 3 times longer than that of a 35 MPa cylinder vessel system with the same volume. The hydrogen-charging rate of this system is equal to the 35 MPa cylinders without any external cooling facility. And release of hydrogen at 243 K is enabled due to the use of hydrogen-absorbing alloy with high-dissociation pressure, for example Ti<sub>35</sub>Cr<sub>34</sub>Mn<sub>31</sub> alloy.</div>

References

6